查看其他答案

先确认你的OLT版本是否支持，可以通过命令行查看上行端口实时流量。
1、先查看确定上行板位置
MA5683T-01(config)#display board 0
-------------------------------------------------------------------------
SlotID BoardName Status SubType0 SubType1 Online/Offline
-------------------------------------------------------------------------
0 H805GPBD Normal
1 H805GPBD Normal
2 H805GPBD Normal
3 H805GPBD Normal
4
5
6 H801SCUN Standby_normal
7 H801SCUN Active_normal
8 H801GICF Normal
9 H801GICF Normal
10
11
12
-------------------------------------------------------------------------
可以看到设备8、9槽装有上行板。
2、确认上行板在用的上行端口
MA5683T-01(config)#display board 0/9

---------------------------------------
Board Name : H801GICF
Board Status : Normal
---------------------------------------

------------------------------------------------------------------------------
Port Port Optic Native MDI Speed Duplex Flow- Active Link
Type Status VLAN (Mbps) Ctrl State
------------------------------------------------------------------------------
0 GE absence 1 - auto auto off active offline
1 GE normal 1 - auto_1000 auto_full off active online
------------------------------------------------------------------------------
Note: For any port, setting MDI to auto-negotiation is invalid, For a 1000 M
Electrical port in the full-duplex mode, setting MDI to any value is
invalid
确定1口为在用端口。
3、查看上行口实时流量。
MA5683T-01(config)#interface giu 0/9
MA5683T-01(config-if-giu-0/9)#display port traffic 1
The received traffic of this port(packets/s) =1754
The received traffic of this port(octets/s) =262981
The transmitted traffic of this port(packets/s) =1818
The transmitted traffic of this port(octets/s) =1037227