通信人家园

 找回密码
 注册

只需一步,快速开始

短信验证,便捷登录

搜索

军衔等级:

  三级通信军士

注册:2008-3-26
跳转到指定楼层
1#
发表于 2020-6-8 16:24:28 |只看该作者 |倒序浏览
Thiswrite-up briefly summarizes the Summary_of_CPRI_Specification.doc (101 KB, 下载次数: 4, 查看: 1 家园分)


InterfaceSpecification for the BTS Low Cost Architecture team, which is headed up byMark Kanne. Version 1.0 of the CPRI Interface Specification (spec) was releasedon 9/30/03, and can be obtained at the CPRI website listed below. Note thatoriginally there was some concern over whether Motorola employees coulddownload the CPRI spec, but in an E-mail from Ralph Kamin on 10/14/03 he statedit was okay to download it. The CPRI website is as follows :  http://www.cpri.info/
ThisCPRI spec summary write-up consists of the 4 sections listed below. Thefirst 3 sections are based upon information from the 54-page CPRI spec. Thelast section discusses how the CPRI spec relates to Motorola’s current CDMASuperCell BTS architecture, for comparison purposes.
1)     Introduction
2)     System Description andInterface Baseline
3)     Interface Specification
4)     CPRI spec Relationship toMotorola’s CDMA BTS

The CPRI spec defines a digitized radio Base Station(BS) internal interface specification between the Radio Equipment Control (REC)and Radio Equipment (RE), as shown in Figure 1. Note that Iub refers to theinterface between the Radio Network Controller (RNC) and UMTS radio BS (NodeB), while Uu refers to the UMTS air interface.

举报本楼

本帖有 2 个回帖,您需要登录后才能浏览 登录 | 注册
您需要登录后才可以回帖 登录 | 注册 |

手机版|C114 ( 沪ICP备12002291号-1 )|联系我们 |网站地图  

GMT+8, 2024-11-25 02:05 , Processed in 0.118875 second(s), 19 queries , Gzip On.

Copyright © 1999-2023 C114 All Rights Reserved

Discuz Licensed

回顶部