Develop automatic test program and setup test system for OCM/CTM product
Improve and optimize OCM/CTM product test system architecture.
Test system failure troubleshooting and analyze test result.
Transfer new test program to manufactory and support test production line setup
Work with OCM/CTM product designer for new product DVT testing.
Work with OCM/CTM product designer for product yield improvement and RMA analysis.
Support other optical product ODVT and test development.
Organizational Relationships
Reports to:
Optical Test Manager
Direct Reports:
NA
Indirect Reports (through Direct Reports):
NA
Dotted Line (Matrix) Reports:
NA
Primary Location:
Shanghai
Job Requirements
Education:
Bachelor or Master in Engineering, Photonics, or optics major.
Experience:
5+ years’ work experience in optical or similar industry.
Demonstrated ability to lead people and achieve results through others
Experience with problem analysis and resolution.
Able to develop long-term plans, programs and goals, to evaluate work accomplishments and provide effective feedback
Experience with test system or test platform development.
Special Skills:
Good knowledge with optical product, and proficiency with optical product test solution.
Proficiency with test instrument automation and Labview, Labwindows CVI, C# or C++. Be familiar with Oracle, SQL data client/server architecture.
Statistical tools such as Minitab or equivalent, familiar with Gage R&R, statistical process control etc.
Excellent interpersonal and communication skills
Proficiency in all aspects of English and Chinese language.
EHS Demands:
While performing the duties of this job, the employee is strictly required to follow the guidelines as below:
Electrical shock. There’re two kinds of electrical power supplier at lab area, including 220V and 110V. Pls. check the devices labels and instructions carefully before plug-in, and do not touch or operate any power distribution system without right training.
Fiber injury. Be careful of the fiber debris for all fiber handling. Take the protection glasses for fiber cutting, splicing and welding.
Laser power hazard. Know the laser hazards to skin and eyes. Do not view directly or exposure to the beam. Take the high power protection glasses for all the high power test at specified area with clear warning labels.
Fire safety. Know the locations and operating procedures of all safety equipment including: fire extinguisher, fire alarm and the emergency exits. Follow the fire drill requirement, and turn off the electrical equipment if possible.
Competencies:
Individual Contributor
Adaptability, Customer Focus, Innovation, Planning and Organizing, Problem Solving, Decision Making and Continuous Improvement, Professional and Technical Knowledge and Skills, Reliable and Dependable, Results Oriented, Teamwork and Positive Relationships, Work Standards/Quality/ Details
Job Element
Wt %
Specific Duty
1) New Product Test Program Development and DVT testing
40%
Develops automated test and measurement to support the introduction of new OCM/CTM product.
Implement new product DVT testing.
Product failure troubleshooting and analyze
Work with designer together for product optimization.
2) Manufacturing Operations Supporting and Maintenance
20%
A) Transfer new product test program to volume manufacturing sites and TTR support.
B) Provides technical support for manufacturing production line.
C) Product issue troubleshooting and RMA support.
D) Support new manufacturing test bench setup.
E) Maintain SHA Lab test bench for product verification.
3) Test system development and improvement for OCM/CTM
40%
Develop and improve OCM/CTM test system architecture
New test system budget estimates and planning.
Drive ideas for test efficiency improvement and test time reduction.
发表于 2021-8-12 11:15:16
