[原创]POE/SLIC资料

swzxb

<div><font face="Verdana"><font size="2"><span id="_FoxCURSOR">1 POE模块 AG9000/AG8000</span></font></font></div><div><font face="Verdana"><font size="2"><span>The Ag9000-S series of modules are designed to extract power from a conventional twisted pair Category 5 Ethernet cable, conforming to the IEEE 802.3af Power-over-Ethernet (PoE) standard.<br/>IEEE 802.3af allows for two power options for Category 5 cables and the Ag9000-S series have two pairs of power inputs pins: - VA1&amp;2 and VB1&amp;2 to accommodate this, see Figure 1.<br/>The Ag9000-S signature and control circuit provides the PoE compatibility signature and power classification required by the Power Sourcing Equipment (PSE) before applying up to 15W power to the port. The Ag9000 is compatible with Class 0 to Class 3 equipment.<br/>The high efficiency DC/DC converter operates over a wide input voltage range and provides a regulated low ripple and low noise output. The DC/DC converter also has built-in overload and short-circuit output protection.</span></font><div><font size="2"></font>&nbsp;</div><div>2 SLIC</div><div>&nbsp;</div><div><font size="2">The Silver Telecom Ag1171 is a single Subscriber Line Interface Circuit (SLIC) in a 14 pin single in line (SIL) format. The combination of features and packaging offers extremely efficient use of board area, saving significant system size and cost, minimising time to market for Telephony Systems developers.<br/>The Ag1171 has been designed to work with loop lengths of typically 1.0km (470R including telephone).<br/>The Ag1171 has integral dc/dc converter and ringing generation thus providing all the line powering requirements from a single supply. The Ag1171 requires a minimum of external components, making it ideal for low line count, short loop length applications, such as WLL Terminal (WLL), Fixed Cellular Terminals (FCT), Fixed Wireless Terminals (FWT) and Internet Telephony (VoIP).</font></div><div><font size="2"></font>&nbsp;</div><div><font size="2"><a href="mailto:jacky@walasey.com">jacky@walasey.com</a></font></div><div><font size="2"></font>&nbsp;</div><div><font size="2">0755-83295597</font></div></font></div><div><font size="2"></font>&nbsp;</div><div>2 SLIC</div><div>&nbsp;</div><div><font size="2">The Silver Telecom Ag1171 is a single Subscriber Line Interface Circuit (SLIC) in a 14 pin single in line (SIL) format. The combination of features and packaging offers extremely efficient use of board area, saving significant system size and cost, minimising time to market for Telephony Systems developers.<br/>The Ag1171 has been designed to work with loop lengths of typically 1.0km (470R including telephone).<br/>The Ag1171 has integral dc/dc converter and ringing generation thus providing all the line powering requirements from a single supply. The Ag1171 requires a minimum of external components, making it ideal for low line count, short loop length applications, such as WLL Terminal (WLL), Fixed Cellular Terminals (FCT), Fixed Wireless Terminals (FWT) and Internet Telephony (VoIP).</font></div><div><font size="2"></font>&nbsp;</div><div><font size="2"><a href="mailto:jacky@walasey.com">jacky@walasey.com</a></font></div><div><font size="2"></font>&nbsp;</div><div><font size="2">0755-83295597</font></div>