通信人家园

标题: OLT至ONU接烽火FR2600-420 [查看完整版帖子] [打印本页]

时间: 2016-12-15 22:44

作者: 510440 标题: OLT至ONU接烽火FR2600-420

烽火FR2600-420怎么写数据

时间: 2017-6-15 16:47

作者: 平少mx

Router#config
Router_config#aaa authentication login default enable
Router_config#aaa authentication enable default none
Router_config#username jzyd password 0 admin
2.进入接口配置模式
Router_config#interface loopback0
Router_config_loop0#ip add 211.140.207.104 255.255.255.255 //配置公网IP
9  Router_config#controller E1 2/0 //2M板卡所在槽位2
Router_config_controller#unframed
Router_config_controller#exit
Router_config#interface Serial2/0:0 //配置互联口
Router_config_Serial2/0:0#ip address 10.62.16.34 255.255.255.252
Router_config_Serial2/0:0#encapsulation ppp
Router_config_Serial2/0:0#ip nat outside
Router_config#interface FastEthernet0/1 //内部私网网关，内网接口
Router_config_f0/1#ip add 192.168.0.1 255.255.255.0
Router_config_f0/1#ip nat inside
3.配置默认路由
Router_config#ip route default 10.62.16.33
4.访问规则配置
Router_config#ip access-list standard 1
Router_config_std_nacl#permit 192.168.0.0 255.255.255.0
5，配置DHCP
Router_config#ip dhcpd pool 1
Router_config#network 192.168.0.0 255.255.255.0
range 192.168.0.2 192.168.0.254
default-router 192.168.0.1
dns-server 211.137.32.178 202.96.64.68
6.配置NAT
Router_config#ip nat inside source list 1 interface loopback0
或采用地址池方式：
ip nat pool pool1 211.140.207.104 211.140.207.104 255.255.255.255 rotary
ip nat inside source list 1 pool pool overload
7,端口映射配置
Router_config#ip nat inside source static tcp 192.168.0.200 22 211.140.207.104 22 //此部分为MAS服务器端
口映射的配置
Router_config#ip nat inside source static tcp 192.168.0.200 80 211.140.207.104 80
Router_config#ip nat inside source static tcp 192.168.0.200 50110 211.140.207.104 50110
Router_config#ip nat inside source static udp 192.168.0.200 161 211.140.207.104 161
Router_config#ip nat inside source static udp 192.168.0.200 162 211.140.207.104 162
8，保存配置
Router#wri

通信人家园 (https://www.txrjy.com/)