通信人家园

标题: OLT上诊断模式telnet光猫 [查看完整版帖子] [打印本页]

时间: 2016-11-23 15:23

作者: nancyxu0217 标题: OLT上诊断模式telnet光猫

MA5680T(config)#

MA5680T(config)#diagnose

MA5680T(diagnose)%%telnet ?
---------------------------------------------
  Command of diagnose Mode:
---------------------------------------------
frameid/slotid/portid<S><Length 5-15>
                  Frameid/slotid/portid
---------------------------------------------
  Command of user Mode:
---------------------------------------------
hostname<I><X.X.X.X>  IP address or hostname of a remote system

MA5680T(diagnose)%%telnet 0/14/0 1
{ <cr>|ont-ip<I><X.X.X.X>|ont-vlan<U><1,4094> }:

  Command:
      telnet 0/14/0 1
  Press CTRL_] to quit telnet mode
  Trying 192.168.1.1 ...
  Connected to 192.168.1.1 ...
Welcome Visiting Huawei Home Gateway
Copyright by Huawei Technologies Co., Ltd.

Login:root
Password:
Password is default value, please modify it!

WAP>?

时间: 2016-11-24 10:46

作者: mlpy2005

奇怪，我怎么就不能telnet 参数加端口 ,只能加IP地址
(diagnose)%%telnet 0/3/0
求指教

时间: 2016-11-29 11:08

作者: babayuant

mlpy2005 发表于 2016-11-24 10:46
奇怪，我怎么就不能telnet 参数加端口 ,只能加IP地址
(diagnose)%%telnet 0/3/0
求指教

后面需要加ONT ID

通信人家园 (https://www.txrjy.com/)