通信人家园

标题: 求助：中兴c220加f803开局不能下发配置 [查看完整版帖子] [打印本页]

时间: 2014-3-19 15:24

作者: glindows 标题: 求助：中兴c220加f803开局不能下发配置

新入手中兴c220一台，单控、单电、一epfc板，系统版本为V1.1.3P2T6
根据开局手册配置好后发现olt配置的onu信息不能下发，导致网络不通。手动配置onu（f803）后可以正常通信。
下面是OLT配置
Building configuration...
!**********Before interface -- show run on RP start!*********
!
!
add-rack rackno 0 racktype ZXPON
add-shelf rackno 0 shelfno 0 shelftype ZXA10C220-B
add-card rackno 0 shelfno 0 slotno 1 EPFC
add-card rackno 0 shelfno 0 slotno 14 EIG
auto-update version
!
clock
!
!
vlan-reserve 4001-4090
vlan database
  vlan 1,100
!
epon
  encrypt algorithm 0/1 triple-churning key-update-period 20 churning-timer 3
!

interface vlan 100
  ip address 10.5.5.254 255.255.255.0
!
interface null1
!
interface epon-olt_0/1/1
  no shutdown
  p2p mode group
  onu 1 type ZTE-F803 mac a0ec.8059.b201 ip-cfg static
  onu 2 type ZTE-F803 mac a0ec.8059.ac89 ip-cfg static
!
interface epon-onu_0/1/1:1
  switchport mode trunk vport 1
  switchport vlan 1,100  tag vport 1
  authentication enable
  description $$$$no description
  user-info no user's information
  encrypt direction downstream  enable
  autocfg enable
!
interface epon-onu_0/1/1:2
  switchport mode trunk vport 1
  switchport vlan 1  tag vport 1
  authentication enable
  description $$$$no description
  user-info no user's information
  encrypt direction downstream  enable
  autocfg enable
!
interface epon-olt_0/1/2
  no shutdown
  p2p mode group
--More-- !
interface epon-olt_0/1/3
  no shutdown
  p2p mode group
!
interface epon-olt_0/1/4
  no shutdown
  p2p mode group
!
interface gei_0/14/1
  hybrid-attribute fiber
  negotiation auto
  flowcontrol disable
  port-protect disable
  switchport mode hybrid
  switchport vlan 100  tag
!

!
ip route 0.0.0.0 0.0.0.0 10.5.5.1
!
mac aging-time 300
mac monitor-period 10
mac usage-threshold 70
!
!
!
--More--
!
!
pon-onu-mng epon-onu_0/1/1:1
no Forbid-auto-dispatch
Forbid-auto-dispatch voip
mgmt-ip onu-ip 10.5.5.101 255.255.255.0 7 100  mgm-ip 10.5.5.0 255.255.255.0 10.
5.5.1 status enable
!
!
pon-onu-mng epon-onu_0/1/1:2
no Forbid-auto-dispatch
Forbid-auto-dispatch voip
!
红色部分即为手动配置的地方

另外下面是f803手动配置的信息

configure vlan database
  vlan 100
end
configure vlan 100
  addport fei_0/1/1-16 untag
  addport gei_0/2/1 tag
end

configure
nvram boot-ftptype FTP
end
configure interface inband-vlan 100
  ip address 10.5.5.101 255.255.255.0 name "ZTESUBNET"
end
configure
ip route 0.0.0.0 0.0.0.0 10.5.5.1 name "ZTEROUTE"
  pon sn epon A0EC8059B201
  pon sn gpon ZTEG0x03928002
pon password epon ZTEZTE
  pon onu-register-protect mode 60min
loop-check recover-interval 0
end
configure interface fei_0/1/1
switchport default vlan 100
end
configure interface fei_0/1/2
switchport default vlan 100
end
configure interface fei_0/1/3
switchport default vlan 100
end
configure interface fei_0/1/4
switchport default vlan 100
end
configure interface fei_0/1/5
switchport default vlan 100
end
configure interface fei_0/1/6
switchport default vlan 100
end

configure interface fei_0/1/7
switchport default vlan 100
end
configure interface fei_0/1/8
switchport default vlan 100
end
configure interface fei_0/1/9
switchport default vlan 100
end
configure interface fei_0/1/10
switchport default vlan 100
end
configure interface fei_0/1/11
switchport default vlan 100
end
configure interface fei_0/1/12
switchport default vlan 100
end
configure interface fei_0/1/13
switchport default vlan 100
end
configure interface fei_0/1/14
switchport default vlan 100
end
configure interface fei_0/1/15
switchport default vlan 100
end
configure interface fei_0/1/16
switchport default vlan 100
end
configure interface gei_0/2/1
flowcontrol disable
forward unknown-multicast flood
end
configure
eth-switch port-protect enable

目前上面的配置可以vlan100正常通信

但是问题是这是手动配置的onu，olt下发配置失败，也没有提示错误，不知道问题出在哪里，请各位指教一下啊。

时间: 2014-3-21 14:54

作者: 天下一剑

升级一下OLT版本或者找中兴工程师解决。

通信人家园 (https://www.txrjy.com/)