烽火上联捆绑
(1) 端口属性：属性要完全一致，包括端口模式、全双工、1000M、端口强制性等
AN5516\device# show port 19:2 // 查看上联口模式
AN5516\device# set uplink port 19:4 interface_mode serdes // 串行
AN5516\device# set uplink port 19:5 interface_mode serdes // 串行
AN5516\device# set uplink port 19:4 auto_negotiation disable
AN5516\device# set uplink port 19:5 auto_negotiation disable
(2) 重新设置OLT的管理VLAN透传
AN5516\service# set manage vlan name manage modify inputport 19:2,19:4,19:5
(3) 创建trunk组并修正Vlan透传
AN5516\vlan# show service vlan // 查看局端Vlan
AN5516\vlan# delete service_vlan name data1 //删除局端VLAN
AN5516\device# set trunking groupno 1 19:2 grouping 19:4,19:5 //需要先删除局端VLAN才可以创建TRUNK组
AN5516\vlan# set service data1 vid_begin 1701 vid_end 1703 trunk 1 tagged service_type 1 //重新添加局端VLAN加入TEUNK组
// service_type 1:data; 4:voip
// 上联做捆绑后，网管无上联端口Trunk选项，需手工添加。