通信人家园

标题: [求助]tds小区建立时为什么设置定时器，代码如下 [查看完整版帖子] [打印本页]

时间: 2012-2-26 15:08

作者: 897195177 标题: [求助]tds小区建立时为什么设置定时器，代码如下

#设置定时器
      ACTIVERUN $testid
      ADDTOTEST $testid $resid
      OUTPUT "Resid = $resid!"

      GETDATA $resid "UpaMbms2.00.200d_CellSetupReq"
      GETDATA $resid "UpaMbms2.00.200d_McchSccpchSetupReq"
      GETDATA $resid "UpaMbms2.00.200d_FachSccpchSetupReq"
      GETDATA $resid "UpaMbms2.00.200d_PrachSetupReq"
      GETDATA $resid "UpaMbms2.00.200d_MtchSccpchSetupReq"

      GETDATA $resid "MBMS_SESSION_START"
      GETDATA $resid "UpaMbms2.00.200d_PhysicalSharedChannelReconfigurationRequest"
      #CRITICAL MSG REQ
      GETDATA $resid "UpaMbms2.00.200d_MBMSNotifiUpdateComd_sessionStart1"
      GETDATA $resid "UpaMbms2.00.200d_mbmsModifServsInfor_sessionStart1"
      GETDATA $resid "UpaMbms2.00.200d_mbmsUnModifServsInfo_sessionStart1"
      GETDATA $resid "UpaMbms2.00.200d_mbmsGeneralInfo_sessionStart1"
      GETDATA $resid "UpaMbms2.00.200d_mbmsComPTMRBInfo_sessionStart1"
      GETDATA $resid "UpaMbms2.00.200d_mbmsCurrCellPTMRBInfo_sessionStart1"

      #CRITICAL MSG RSP
      GETDATA $resid "UpaMbms2.00.200d_MBMSNotifiUpdateComd_sessionStart2"
      GETDATA $resid "UpaMbms2.00.200d_mbmsModifServsInfor_sessionStart2"
      GETDATA $resid "UpaMbms2.00.200d_mbmsUnModifServsInfo_sessionStart2"
      GETDATA $resid "UpaMbms2.00.200d_mbmsGeneralInfo_sessionStart2"
      GETDATA $resid "UpaMbms2.00.200d_mbmsComPTMRBInfo_sessionStart2"
      GETDATA $resid "UpaMbms2.00.200d_mbmsCurrCellPTMRBInfo_sessionStart2"

时间: 2012-2-27 10:33

作者: jimmy_79

因为是时分同步~~

通信人家园 (https://www.txrjy.com/)