[推荐]epon完全配置 - 通信人家园

epon完全配置

一、配置线路模板
dba-profile add profile-id 10 profile-name "dba-profile_10" type2 assure 10240
ont-lineprofile epon profile-id 1 profile-name "MA562X"
llid dba-profile-id 1
commit
ont autofind distance-time 1
二、MA5680T上对MDU相关配置
1、进入PON板进行ONT确认
interface epon 0/1
port 0 ont-auto-find enable
ont confirm 3(端口号) ontid 14 mac-auth 0018-82EE-4783 snmp ont-lineprofile-id 1 desc LDJY-N8-2-9-1
2、配置管理IP及Service-port
ont ipconfig 3 14 ip-address 10.126.73.134 mask 255.255.255.0 gateway 10.126.73.1 manage-vlan 2
service-port  vlan 2 epon 0/1/3 ont 14 multi-service user-vlan 2(MDU管理VLAN的service-port)
service-port  vlan 1334 epon 0/1/3 ont 14 multi-service user-vlan 1334(MDU上普通业务VLAN的service-port)
service-port vlan 26 epon 0/3/1 ont all multi-service user-vlan 233 tag-transform default(MDU上QINQ业务VLAN的service-port)
QINQ外层VLAN相关设置
vlan 20 smart
vlan 25 to 26 smart
vlan attrib 20 q-in-q
vlan attrib 25 to 26 q-in-q
三、MDU配置
宽带：service-port vlan %d eth 0/1/%d user-vlan untagged rx-cttr 6 tx-cttr 6
窄带： vlan 1334 to 1335
y
port vlan 1334 to 1335 0/0 1
y

interface vlanif 1334
ip address 10.38.162.134 255.255.255.0
qui

interface vlanif 1335
ip address 10.38.167.134 255.255.255.0
qui

voip
ip address media 10.38.167.134 10.38.167.3
ip address signaling 10.38.162.134
qui

interface h248 0
y
if-h248 attribute mgip 10.38.162.134 mgport 2944 transfer udp

if-h248 attribute mgcip_1 192.128.0.8 mgcport_1 2944

if-h248 attribute mgcip_2 192.128.0.6 mgcport_2 2944

if-h248 attribute mg-media-ip 10.38.167.134

if-h248 attribute start-negotiate-version 1

if-h248 attribute domainName huawei.com

mg-ringmode add 0 0 4
digitmap-timer long 10
reset coldstart
y

qui

pstnport
pstnport attribute batset 0/2/1 0/2/24 reverse-pole-pulse disable
qui

esl user
mgpstnuser batadd 0/2/1 0/2/24 0 terminalid 0

qui

ip route-static 10.7.116.160 255.255.255.252 10.38.162.3
ip route-static 10.7.116.128 255.255.255.252 10.38.162.3