通信人家园
标题:
中兴EPON OLT-C300开局配置
[查看完整版帖子]
[打印本页]
时间:
2021-11-24 20:26
作者:
zhmmusi
标题:
中兴EPON OLT-C300开局配置
一、基础配置
1、自定义时间
clock set hh:mm:ss Apr 8 2018
con t
username zte password zte privilege 15 //用户名密码
2、自定义名称
hostname CeShi-OLT-ZTE-C300(机房名称-OLT-品牌-型号)
3、自动保存配置
auto-write enable //开启设备自动保存
auto-write 00:00:00 everyday//设置自动保存时间为每天00:00:00
snmp-server community zte view AllView rw团体名配置,(注意AllView大小写)
二、管理VLAN和管理IP地址
vlan 60//创建管理VLAN
exit
interface vlan 60
ip address 10.7.1.1 255.255.255.252//配置设备管理IP
exit
ip route 0.0.0.0 0.0.0.0 10.7.1.2//配置网关
三、配置聚合组
interface smartgroup1 //创建聚合组1
exit
interface gei_1/19/3 //端口19/3加入聚合组1
smartgroup 1 mode on
exit
interface gei_1/19/4 //端口19/4加入聚合组1
smartgroup 1 mode on
exit
interface smartgroup1 //聚合组1配置VLAN
switchport vlan 60 tag
exit
end
write //保存配置
4、开启QinQ功能
vlan-smart-qinq enable
interface epon-olt_1/2/1-8
vlan-smart-qinq enable
exit
5、开启PON口环路检测功能
interface epon-olt_1/2/1-8
loopback-detection enable
exit
6、配置ONU的PON口带宽限制(不配置默认为100M)
epon
onu-sla-profile profile-name create 1G
onu-sla-profile profile-set 1G downstream maximum 1000000
exit
7、onu-PNP配置
onu-pnp
onu-type-default epon ZTE-D400
bandwidth epon 1G
enable
onu-vlan epon-olt_1/2/1 mode tag vlan 2000
enable epon-olt_1/2/1
olt-vlan transparent epon-olt_1/2/1
onu-uni-vlan epon-olt_1/2/1 eth_0/1 mode tag start-vlan 1
onu-uni-vlan epon-olt_1/2/1 eth_0/2 mode tag start-vlan 2
onu-uni-vlan epon-olt_1/2/1 eth_0/3 mode tag start-vlan 3
onu-uni-vlan epon-olt_1/2/1 eth_0/4 mode tag start-vlan 4
8、配置全局的QINQ
vlan-smart-qinq ingress-port epon-olt_1/2/1 cvlan 1 to 512 svlan 100
9、开启所有的PON口
interface epon-olt_1/2/1-8
no shutdown
exit
通信人家园 (https://www.txrjy.com/)
Powered by C114