通信人家园

标题: 38.331中信令后面的标签是什么意思?  [查看完整版帖子] [打印本页]

时间:  2021-6-29 14:45
作者: xiangchina12     标题: 38.331中信令后面的标签是什么意思?

不理解这些便签是什么意思,虽然协议前面有说明,翻译过来还是不清楚协议想表达个什么意思,协议原文摘录如下
        
Abbreviation
      
Meaning
  
      
Cond conditionTag
   
Conditionally present
  
Presence of the field is specified in a tabular form following the ASN.1 segment.

     
CondC conditionTag
   
Configuration condition
  
Presence of the field is conditional to other configuration settings.

     
CondM conditionTag
   
Message condition
  
Presence of the field is conditional to other fields included in the  message.

     
Need S
   
Specified
  
Used for (configuration) fields, whose field description or procedure specifies the UE behavior performed  upon receiving a message with the field absent (and not if field description  or procedure specifies the UE behavior when field is not configured).

     
Need M
   
Maintain
  
Used for (configuration) fields that are stored by the UE i.e. not  one-shot. Upon receiving a message with the field absent, the UE maintains  the current value.

     
Need N
   
No action (one-shot  configuration that is not maintained)
  
Used for (configuration) fields that are not stored and whose presence  causes a one-time action by the UE. Upon receiving message with the field  absent, the UE takes no action.

     
Need R
   
Release
  
Used for (configuration) fields that are stored by the UE i.e. not  one-shot. Upon receiving a message with the field absent, the UE releases the  current value.



时间:  2021-6-30 08:05
作者: xiangchina12

尤其是Need S        Specified
Used for (configuration) fields, whose field description or procedure specifies the UE behavior performed upon receiving a message with the field absent (and not if field description or procedure specifies the UE behavior when field is not configured).
这句话让人觉得前后矛盾

时间:  2022-10-19 13:44
作者: cheryhappy

xiangchina12 发表于 2021-6-30 08:05
尤其是Need S        Specified
Used for (configuration) fields, whose field description or procedure specif ...

我理解此类参数需要显式指定,如果该域不存在,UE需要使用其它值代替。
scramblingID0
DL DMRS scrambling initialization (see TS 38.211 [16], clause 7.4.1.1.1). When the field is absent the UE applies the value physCellId configured for this serving cell.




通信人家园 (https://www.txrjy.com/) Powered by C114