| 5GC：5G核心网(5G Core Network) |
| 5GS：5G系统(5G System) |
| 5QI：5G QoS标识符(5G QoS Identifier) |
| A-CSI：非周期CSI(Aperiodic CSI) |
| AKA：身份验证和密钥协议(Authentication and Key Agreement) |
| AMBR：总最大比特率(Aggregate Maximum Bit Rate) |
| AMC：自适应调制和编码(Adaptive Modulation and Coding) |
| AMF：访问和移动性管理功能(Access and Mobility Management Function) |
| ARP：分配和保留优先级(Allocation and Retention Priority) |
| BA：带宽适应(Bandwidth Adaptation) |
| BCH：广播频道(Broadcast Channel) |
| BH：后传(Backhaul) |
| BL：带宽降低低复杂度(Bandwidth reduced Low complexity) |
| BPSK：二进制相移键控(Binary Phase Shift Keying) |
| C-RNTI：小区RNTI(Cell RNTI) |
| CAG：封闭式接入组(Closed Access Group) |
| CAPC：通道接入优先级(Channel Access Priority Class) |
| CBRA：基于竞争的随机接入(Contention Based Random Access) |
| CCE：控制通道元素(Control Channel Element) |
| CD-SSB：小区定义SSB(Cell Defining SSB) |
| CFRA：无竞争随机接入(Contention Free Random Access) |
| CHO：条件切换(Conditional Handover) |
| CIoT：蜂窝物联网(Cellular Internet of Things) |
| CLI：交叉链接干扰(Cross Link interference) |
| CMAS：商业移动警报服务(Commercial Mobile Alert Service) |
| CORESET：控制资源集(Control Resource Set) |
| DAG：有向无环图(Directed Acyclic Graph) |
| DAPS：双活动协议栈(Dual Active Protocol Stack) |
| DFT：离散傅立叶变换(Discrete Fourier Transform) |
| DCI：下行链路控制信息(Downlink Control Information) |
| DCP：PS-RNTI做CRC加扰的DCI(DCI with CRC scrambled by PS-RNTI) |
| DL-AoD：下行链路离开角度(Downlink Angle-of-Departure) |
| DL-SCH：下行共享信道(Downlink Shared Channel) |
| DL-TDOA：下行链路到达时差(Downlink Time Difference Of Arrival) |
| DMRS：解调参考信号(Demodulation Reference Signal) |
| DRX：不连续接收(Discontinuous Reception) |
| E-CID：强型Cell-ID（定位方法）(Enhanced Cell-ID (positioning method)) |
| EHC：以太网头压缩(Ethernet Header Compression) |
| ETWS：地震和海啸预警系统(Earthquake and Tsunami Warning System) |
| GFBR：保证的流比特率(Guaranteed Flow Bit Rate) |
| HRNN：可读网络名称(Human-Readable Network Name) |
| IAB：集成访问和回程(Integrated Access and Backhaul) |
| I-RNTI：非活动RNTI(Inactive RNTI) |
| INT-RNTI：中断RNTI(Interruption RNTI) |
| LDPC：低密度奇偶校验(Low Density Parity Check) |
| MDBV：最大数据突发量(Maximum Data Burst Volume) |
| MIB：主信息块(Master Information Block) |
| MICO：仅移动手机发起的连接(Mobile Initiated Connection Only) |
| MFBR：最大流比特率(Maximum Flow Bit Rate) |
| MMTEL：多媒体电话(Multimedia telephony) |
| MNO：移动网络运营商(Mobile Network Operator) |
| MT：移动终端(Mobile Termination) |
| MU-MIMO：多用户MIMO(Multi User MIMO) |
| Multi-RTT：多程往返时间(Multi-Round Trip Time) |
| NB-IoT：窄带物联网(Narrow Band Internet of Things) |
| NCGI：NR小区全局标识符(NR Cell Global Identifier) |
| NCR：邻区关系(Neighbour Cell Relation) |
| NCRT：相邻小区关系表(Neighbour Cell Relation Table) |
| NGAP： NG应用协议(NG Application Protocol) |
| NID：网络标识符(Network Identifier) |
| NPN：非公共网络(Non-Public Network) |
| NR：NR无线接入(NR Radio Access) |
| P-RNTI：寻呼RNTI(Paging RNTI) |
| PCH：寻呼频道(Paging Channel) |
| PCI：物理小区标识符(Physical Cell Identifier) |
| PDCCH：物理下行控制信道(Physical Downlink Control Channel) |
| PDSCH：物理下行共享信道(Physical Downlink Shared Channel) |
| PNI-NPN：公共网络集成NPN(Public Network Integrated NPN) |
| PO：寻呼的时机(Paging Occasion) |
| PRACH：物理随机接入信道(Physical Random Access Channel) |
| PRB：物理资源块(Physical Resource Block) |
| PRG：预编码资源块组(Precoding Resource block Group) |
| PS-RNTI：省电RNTI(Power Saving RNTI) |
| PSS：主同步信号(Primary Synchronisation Signal) |
| PUCCH：物理上行链路控制信道(Physical Uplink Control Channel) |
| PUSCH：物理上行链路共享信道(Physical Uplink Shared Channel) |
| PWS：公共预警系统(Public Warning System) |
| QAM：正交幅度调制(Quadrature Amplitude Modulation) |
| QFI：QoS流ID(QoS Flow ID) |
| QPSK：正交相移键控(Quadrature Phase Shift Keying) |
| RA：随机接入(Random Access) |
| RA-RNTI：随机接入RNTI(Random Access RNTI) |
| RACH：随机接入信道(Random Access Channel) |
| RANAC：于RAN的通知区号(RAN-based Notification Area Code) |
| REG：资源元素组(Resource Element Group) |
| RIM：远程干扰管理(Remote Interference Management) |
| RMSI：剩余最低SI(Remaining Minimum SI) |
| RNA：基于RAN的通知区域(RAN-based Notification Area) |
| RNAU：基于RAN的通知区域更新(RAN-based Notification Area Update) |
| RNTI：无线网络临时标识符(Radio Network Temporary Identifier) |
| RQA：反射式QoS属性(Reflective QoS Attribute) |
| RQoS：反射式服务质量(Reflective Quality of Service) |
| RS：参考信号(Reference Signal) |
| RSRP：参考信号接收功率(Reference Signal Received Power) |
| RSRQ：参考信号接收质量(Reference Signal Received Quality) |
| RSSI：接收信号强度指示器(Received Signal Strength Indicator) |
| RSTD：参考信号时差(Reference Signal Time Difference) |
| SD：Slice微分器(Slice Differentiator) |
| SDAP：服务数据适配协议(Service Data Adaptation Protocol) |
| SFI-RNTI：时隙格式指示RNTI(Slot Format Indication RNTI) |
| SIB：系统信息块(System Information Block) |
| SI-RNTI：系统信息RNTI(System Information RNTI) |
| SLA：服务水平协议(Service Level Agreement) |
| SMC：安全模式命令(Security Mode Command) |
| SMF：会话管理功能(Session Management Function) |
| S-NSSAI：单个网络切片选择协助信息(Single Network Slice Selection Assistance Information) |
| SNPN：独立非公共网络(Stand-alone Non-Public Network) |
| SPS：半永久性调度(Semi-Persistent Scheduling) |
| SR：调度请求(Scheduling Request) |
| SRS：探测参考信号(Sounding Reference Signal) |
| SRVCC：单无线语音通话连续性(Single Radio Voice Call Continuity) |
| SS：同步信号(Synchronization Signal) |
| SSB：SS / PBCH块(SS/PBCH block) |
| SSS：辅助同步信号(Secondary Synchronisation Signal) |
| SST：切片/服务类型(Slice/Service Type) |
| SU-MIMO：单用户MIMO(Single User MIMO) |
| SUL：补充上行链路(Supplementary Uplink) |
| TA：时间提前(Timing Advance) |
| TPC：发射功率控制(Transmit Power Control) |
| UCI：行链路控制信息(Uplink Control Information) |
| UL-AoA：上行链路到达角度(Uplink Angles of Arrival) |
| UL-RTOA：上行链路相对到达时间(Uplink Relative Time of Arrival) |
| UL-SCH：上行共享信道(Uplink Shared Channel) |
| UPF：用户平面功能(User Plane Function) |
| URLLC：超可靠和低延迟通信(Ultra-Reliable and Low Latency Communications) |
| V2X：车辆连接一切(Vehicle-to-Everything) |
| Xn-C：Xn-控制平面(Xn-Control plane) |
| Xn-U：Xn-用户平面(Xn-User plane) |
| XnAP：Xn应用协议(Xn Application Protocol) |
| 通信人家园 (https://www.txrjy.com/) | Powered by C114 |