通信人家园

标题: C600简单技术命令及详解 [查看完整版帖子] [打印本页]

时间: 2021-3-23 21:48

作者: xiaolu88520 标题: C600简单技术命令及详解

C600常用命令：

show pon onu uncfg 查看未认证的ONU

show  gpon  onu state gpon_olt-1/2/1 查看光猫状态

show running-config-interface gpon_olt-1/4/13 查看槽口下的ONU

show running-config-interface gpon_onu-1/1/16:2  查看ONU配置（下发数据、限速模板）

show running-config-interface vport-1/4/13.40:1 查看ONU配置（vlan的嵌套或透传配置）

show mac interface vport-1/1/16.2:1 查看某一台ONU MAC上报情况

show pon power attenuation gpon_onu-1/1/1:1 查看光功率

数据制作脚本：
con t
interface gpon_olt-1/1/1
no onu 28
onu 28 type ZTEG-F660 loid 0872DLZi4081296wc
ex
interface gpon_onu-1/1/1:28

tcont 1 name Tl1DefaultCreate profile FTTH_UPBW
sn-bind disable
gemport 1 name Tl1DefaultCreate tcont 1
exit

interface vport-1/1/1.28:1
  service-port 1 user-vlan 41 vlan 1027 svlan 1002
  service-port 2 user-vlan 43 vlan 2427 svlan 2402
  service-port 3 user-vlan 45 vlan 3327 svlan 3002
  service-port 4 user-vlan 46 vlan 4000 svlan 4058
qos traffic-policy FTTH_DOWNBW direction egress
exit

pon-onu-mng gpon_onu-1/1/3:7
mvlan 2999
mvlan tag eth_0/2 strip
service Tl1DefaultCreate gemport 1
vlan port eth_0/1 mode tag vlan 41
vlan port eth_0/2 mode tag vlan 43 pri 2
!
igmp mvlan 2999
receive-port vport-1/1/16.21:1
exit

interface gpon_onu-1/1/2:%d

tcont 1 name Tl1DefaultCreate profile FTTH_UPBW
sn-bind disable
gemport 1 name Tl1DefaultCreate tcont 1
exit

interface vport-1/1/2.%d:1
  service-port 1 user-vlan 41 vlan %d svlan 1000
  service-port 2 user-vlan 43 vlan %d svlan 2400
  service-port 3 user-vlan 45 vlan %d svlan 3000
  service-port 4 user-vlan 46 vlan 4000 svlan 4002
qos traffic-policy FTTH_DOWNBW direction egress
exit

pon-onu-mng gpon_onu-1/1/2:%d
mvlan 2999
mvlan tag eth_0/2 strip
service Tl1DefaultCreate gemport 1
vlan port eth_0/1 mode tag vlan 41
vlan port eth_0/2 mode tag vlan 43 pri 2
!
igmp mvlan 2999
receive-port vport-1/1/2.%d:1
exit

通信人家园 (https://www.txrjy.com/)