 |
问答管理员：
已解决问题
显示所有答案回应
最佳答案
最佳答案对于频内系统，低于's-Measure' 的才测量本小区的强度，因为是频内顺带测量同频邻区是容易的，不需要Gap。
NOTE 3: The 's-Measure' defines when the UE is required to perform measurements. The UE is however allowed to perform measurements also when the serving cell RSRP exceeds 's-Measure', e.g., to measure cells broadcasting a CSG identity following use of the autonomous search function as defined in TS 36.304 [4].
s-Measure
Serving cell quality threshold controlling whether or not the UE is required to perform measurements of intra-frequency, inter-frequency and inter-RAT neighbouring cells. Value “0” indicates to disable s-Measure.
至于切换需要满足一定条件，包括门限（A3/A5?)及时间要求:Timetotrigger，具体去见36.331.
NOTE 3: The 's-Measure' defines when the UE is required to perform measurements. The UE is however allowed to perform measurements also when the serving cell RSRP exceeds 's-Measure', e.g., to measure cells broadcasting a CSG identity following use of the autonomous search function as defined in TS 36.304 [4].
s-Measure
Serving cell quality threshold controlling whether or not the UE is required to perform measurements of intra-frequency, inter-frequency and inter-RAT neighbouring cells. Value “0” indicates to disable s-Measure.
至于切换需要满足一定条件，包括门限（A3/A5?)及时间要求:Timetotrigger，具体去见36.331.
|
回应该答案 (0) |
回答时间：2011-8-17 08:39其他答案 ( 3 条 )
回答下问题2，Intra不需要Measurement Gap。GAP是为了测异频或者异系统的
多谢二位的解答！
测量这个，其实主要是终端的系统架构设计决定的，协议考虑是尽量减小终端的处理要求，以简约化。测量是要对齐中心频点，测量参考信号等等的。现在的约定是所有异频测量，都需要Gap。在Gap测量周期内，停止所有业务和服务小区的测量等等，专门用于异频邻区的测量。这样终端就不需要在两个频点上面同时扫描。
你可以假设一下，如果没有Gap的概念，终端需要如何进行异频点的测量处理？对应的信号解调是否会翻倍？
你可以假设一下，如果没有Gap的概念，终端需要如何进行异频点的测量处理？对应的信号解调是否会翻倍？
热点问题
