待解决问题
[求助]关于CA场景下的载波交叉调度的一个问题,求解答 (进入论坛模式)
离问题结束还有0天0小时 |
提问者:hust520
|
提问时间:2012-4-29 11:06
书上有这么一段话:
A third motivation for carrier aggregation is support of heterogeneous networks. A
heterogeneous network deployment typically consists of a layer of high-power macrocellsand a layer of low-power small cells (e.g. picocells, Closed Subscriber Group (CSG)
femtocells or relay nodes – see Chapters 24 and 30) with at least one carrier being used
by both layers.[color=red][b] In such a deployment, transmissions from one cell can interfere strongly
with the control channels of another[/b][/color], thus impeding scheduling and signalling. Rather than
simply using separate carriers for the two layers, which would result in inefficient spectrum
usage, carrier aggregation enables multiple carriers to be used for a given layer, while
interference can be avoided by means of cross-carrier scheduling. Cross-carrier scheduling
allows the Physical Downlink Control Channel (PDCCH) on the CC of one serving cell to
schedule transmission resources on a CC of another serving cell, as explained in detail in
Section 28.3.1.
想咨询一下,为什么在宏基站+CSG的这种场景下,下行控制信道之间的干扰会比较大呢?我觉得既然
宏基站和CSG小区在不同的频点上,干扰应该比较小才是啊·~
求解答~~~
A third motivation for carrier aggregation is support of heterogeneous networks. A
heterogeneous network deployment typically consists of a layer of high-power macrocellsand a layer of low-power small cells (e.g. picocells, Closed Subscriber Group (CSG)
femtocells or relay nodes – see Chapters 24 and 30) with at least one carrier being used
by both layers.[color=red][b] In such a deployment, transmissions from one cell can interfere strongly
with the control channels of another[/b][/color], thus impeding scheduling and signalling. Rather than
simply using separate carriers for the two layers, which would result in inefficient spectrum
usage, carrier aggregation enables multiple carriers to be used for a given layer, while
interference can be avoided by means of cross-carrier scheduling. Cross-carrier scheduling
allows the Physical Downlink Control Channel (PDCCH) on the CC of one serving cell to
schedule transmission resources on a CC of another serving cell, as explained in detail in
Section 28.3.1.
想咨询一下,为什么在宏基站+CSG的这种场景下,下行控制信道之间的干扰会比较大呢?我觉得既然
宏基站和CSG小区在不同的频点上,干扰应该比较小才是啊·~
求解答~~~
热点问题