已解决问题
5680T只用SCUN上的端口能上联吗?还是说必须要单独配置上联板?  (进入论坛模式)
提问者：lanyeit   |  提问时间：2013-9-8 17:28
5680T只用SCUN上的端口能上联吗?还是说必须要单独配置上联板?
刚接触OLT,请高手指点,谢谢!
显示所有答案回应     最佳答案
阳极泥 的答案    ( 采纳时间：2015-4-7 07:15 )
应该可以实现，但是主控板挂了就歇菜了，建议单配吧
 |  回应该答案 (1)  |  回答时间：2013-9-23 00:23
其他答案 ( 4 条 )
都可以啊，不过不建议使用主控板上的上联口。主控板倒换的时候比较麻烦。还是单独配GICF上联板吧。
 |  回应该答案 (0)  |  回答者：csqzg   |  2013-9-8 18:18
一般数据上联都是使用GIC开头的板子吧，比如GICG,GICF,GICE什么的。SCU开头的是主控板，比如SCUL，SCUN,SCUB什么的，上面的以太口主要是用于管理的
回应该答案 (0)  |  回答者：bryan1984   |  2013-9-20 23:40
:)
 |  回应该答案 (0)  |  回答者：absnew   |  2013-9-22 14:48
不好意思，前段时间在搞别的，5680T一边放着了，现在我把它重新设置了一下，注册上了5620，TELNET5620上面能PING通上联的网关了，但接在LAN口上的电脑PING不通网关，也上不了网
[global-config]

switch adsl mode to rfc2662 vdsl mode to tr129
trap convert event-to-alarm 0x3721000a
alarm output alarmid 0x2e32305f
xpon mode switch-to profile-mode
dba-profile add profile-id 100 profile-name "dba-profile_100" type3 assure
10240 max 10240
ont-srvprofile gpon profile-id 50 profile-name "srv-profile_50"
ont-port pots 1 eth 2
port vlan eth 1 translation 101 user-vlan 101
port vlan eth 2 translation 101 user-vlan 101
commit
ont-lineprofile gpon profile-id 3000 profile-name "line-profile_3000"
tcont 1 dba-profile-id 100
gem add 0 eth tcont 1
gem add 1 eth tcont 1
gem mapping 0 0 vlan 100
gem mapping 1 0 vlan 101
commit
#
[device-config]

board add 0/1 H802GPBD
board add standby
rack info 0 description "RACK-300" name "RACK-300" manufactured-name "Huawei"
system ex-mode backup
#
[public-config]

snmp-agent local-engineid 800007DB034C1FCC85CE88
#
[vlan-config]

vlan 100 to 101 smart
vlan 1000 smart
port vlan 100 to 101 0/7 0
port vlan 1000 0/7 0
#
[gpon]

interface gpon 0/1
port 0 ont-auto-find enable
port 1 ont-auto-find enable
ont add 0 0 sn-auth "485754434E241926" snmp ont-lineprofile-id 3000 desc "
ONT_NO_DESCRIPTION"
ont ipconfig 0 0 static ip-address 192.168.10.11 mask 255.255.255.0 vlan 100
priority 0 gateway 192.168.10.1
ont add 1 0 sn-auth "46485454CE6EAE3D" omci ont-lineprofile-id 3000
ont-srvprofile-id 50 desc "ONT_NO_DESCRIPTION"
ont port native-vlan 1 0 eth 1 vlan 101 priority 0
ont port native-vlan 1 0 eth 2 vlan 101 priority 0
#
[emu-config]

emu add 0 fan 0 1 "H801FCBC"
#
[fan]

interface emu 0
fan speed mode automatic
#
[bbs-config]

service-port 0 vlan 100 gpon 0/1/0 ont 0 gemport 0 multi-service user-vlan 100 ---- Motag-transform translate inbound traffic-table index 6 outbound traffic-table
index 6
service-port 1 vlan 101 gpon 0/1/0 ont 0 gemport 1 multi-service user-vlan 101 ---- Motag-transform translate inbound traffic-table index 6 outbound traffic-table
index 6
service-port 3 vlan 101 gpon 0/1/1 ont 0 gemport 0 multi-service user-vlan 101 ---- Motag-transform translate
#
[abs-config]

config
#
[config]

mpls label start 8192
#
[prevlanif]

interface vlanif100
#
[vlanif]

interface vlanif100
ip address 192.168.10.1 255.255.255.0
#
[meth]

interface meth0
ip address 10.11.104.2 255.255.255.0
#
[null]

interface null0
#
[aaa]

aaa
authentication-scheme "default"
#
authorization-scheme "default"
#
accounting-scheme "default"
#
domain "default"
#
return
 |  回应该答案 (0)  |  回答者：lanyeit   |  2015-4-4 13:24